Microsonic EPT800, Instruction Manual

Page: 27 / 28

MALFUNCTION AND EXAMINATION
Common Operation Malfunctions
Malfunction Possible Reasons Countermeasure
1
：
Heater
cannot start
Power plug is not properly
connected Disconnect the power plug from the
electric power supply and reconnect
again.
Safety setting cut off the circuit or
the fuse of the electric circuit is
burned Redesign the safety setting or enlarge the
rating capacity of the fuse of the electric
circuit.
Socket does not work Repair the socket by qualified and
experienced electrician.
2
：
Power is on
but heater
cannot work
Safety setting cut off the circuit or
the fuse of the electric circuit is
burned Replace the fuse of the electric circuit by
qualified and experienced electrician.
Working of Safety Tilt Auto Shut-
off Device Place the heater in a vertical position on
flat ground.
3
：
Heater stops
working by
itself.
Safety setting cut off the circuit or
the fuse of the electric circuit is
burned Replace the fuse of the electric circuit by
qualified and experienced electrician.
NOTICE
：
IF ANY OF THE ABOVE COUNTERMEASURES CANNOT RESOLVE
THE MALFUNCTION, PLEASE CONTACT THE APPOINTED SERVICE CENTER
OR SUPPLIER RIGHT AWAY. AS OUR POLICY IS ONE OF CONTINUOUS
IMPROVEMENT AND DEVELOPMENT, WE THEREFORE HOPE THAT YOU WILL
UNDERSTAND WE MUST RETAIN THE RIGHT TO AMEND DETAILS AND/OR
SPECIFICATIONS WITHOUT PRIOR NOTICE.
WEEE
This appliance must not be disposed together with the domestic waste. This
appliance has to be disposed at an authorized place for recycling of electrical
and electronic appliances. By collecting and recycling waste, you help save
natural resources, and make sure the product is disposed in an
environmental friendly and healthy way.
Should there be any discrepancy between the Spanish version and the English version of this
Instruction Manual, the English version shall prevail