©2013 Microsoft Corporation
11
Hanging the PPI 55” Touch Device
1.
With two able-bodied people, lift the device just up and over the wall bracket. The device can be tilted
slightly to hook the device-mounted vertical brackets onto the wall bracket.
2.
Rotate the device to its vertical position. The device’s weight will naturally facilitate this. Take care not to
pinch fingers.
Figure 5.
Hooking the top of the device brackets to the wall bracket (side view)
Figure 6.
Device rotated down so it hangs on wall bracket (quarter view from rear)
3.
Slowly lower the device to allow the brackets to hold the weight of the device, and hold in place for
several seconds.
4.
If desired, you may move the device left or right approximately 3 inches. You will need to lift the device
slightly to do this.
Summary of Contents for Perceptive Pixel
Page 28: ...2013 Microsoft Corporation 28...
