Fast Ethernet Switch for industrial fiber ring
Page
4/10
Management
The integrated http server offers to show status information by using a standard internet
browser. A special configuration is not necessary. Additional to the web based management the
switch offers a MIB to be used in all standardized Network Management Systems (NMS)
supporting SNMPv1 protocol.
With the PC based management tool Device Manager it is possible to configure all ports of the
switch manually. Please refer to the online manual for the Device manager on the disk.
With this tool it is also possible to do the initial TCP/IP setting (IP address, Gateway etc.). This
configuration can be changed afterwards using the TCP/IP protocol.
Attention:
The description for the initial settings can be found in the online manual!
The management information are available inside of the network (inband management). A
special connection is not necessary. Due to this all four twisted pair ports are available to
connect other devices.
With the deactivation of the autonegotiation function of the twisted pair ports the
configuration of the speed to 10 or 100 Mbit/s and full or half duplex mode is done manually.
MICROSENS Device Manager
MICROSENS
GmbH & Co. KG - Kueferstraße 16 - 59067 Hamm / Germany - Tel. +49 23 81/94 52-0 - FAX -100 - www.microsens.com
