Fast Ethernet Switch for industrial fiber ring
Page
2/10
Technical specifications
Type
Manageable Fast Ethernet switch with 4 x 10/100Base-TX and
2 x 100Base-FX uplink for industrial fiber ring
Fiber type
Multimode 62,5/125 or 50/125µm,
Single mode 9/125µm, duplex
Cable type
Shielded Twisted Pair cable, 100 Ohm, Category 5,
Pinout RJ45-ports auto crossing
Data rate
10 or 100 Mbit/s
LED displays
Power
Ready for operation
Link
Link status each port
Act
Data traffic each port
FDX/HDX
Half or full duplex transmission each port
Alarm
Fiber link interrupted
Mounting
35 mm hat rail, according DIN EN 50 022
Power supply
18 - 36 V DC / max. 250 mA by external power supply
connections with screw terminals, redundant ports
Dimensions
38 x 108 x 116 mm (w x d x h)
Operating temperature
-20°C to 60°C
Storage temperature
-20°C to 80°C
Rel. humidity
5% to 90% non condensing
Management
- Status information via web based management (http-Server) or
support of SNMPv1
- Configuration via PC based management tool (Device Manager)
Optical parameter
Multimode
min. distance:
2 km (full duplex)
Output power: -19
dBm
Sensitivity:
-31 dBm
Wavelength:
1300 nm
Single mode
min. distance:
15 km (full duplex)
Output power:
- 15 dBm
Sensitivity:
- 31 dBm
Wavelength:
1300 nm
Mounting
The switch is housed in a solid metal box with an integrated fixture for the installation on
standard 35 mm DIN EN 50 022 rails.
The fixation of the MICROSENS switch on the rail is done with a locking pin that can be opened
from the bottom side. If multiple devices are mounted in line, a minimum space of 20 mm should
be kept between the devices, to ensure a sufficient heat dissipation.
MICROSENS
GmbH & Co. KG - Kueferstraße 16 - 59067 Hamm / Germany - Tel. +49 23 81/94 52-0 - FAX -100 - www.microsens.com
