Power Over Ethernet Power View Pro User Guide
Copyright
2013
Microsemi
15
Rev.1.0, 17-Dec-13
Analog Mixed Signal Group
1 Enterprise, Aliso Viejo, CA 92656, USA; Phone (USA): (800) 713-4113, (ROW): (949) 221-7100 Fax: (949) 756-0308
3.2.2 Main Web Page - Unit Status
Figure 3-5: Unit Status
Unit status reports uplink Ethernet speed (10/100/1000MB), and all ports total PoE power consumption.
3.2.3 Main Web Page
– Ports Status/Reset
Figure 3-6: Ports Status/Reset
Port Status
– P
ort status reports for each port Ethernet link speed (10/100/1000MB) and type (Half
Duplex, Full Duplex), PoE power consumption, and PoE port status.
Power Reset
-
Pressing the
Power Reset button turns off PoE port power for a few seconds, and
immediately restores it back to enabled status.
NOTE:
Pressing the
Power
Reset
button will restore any PoE ports which were disabled
by Telnet/SNMP back to enabled state.