Microscan MS-610, User Manual

Page: 35 / 102

Operations Menu
MS-610 Scanner User’s Manual
2-11
2–Menu C
on
fig.
Operations Menu
The Operations menu allows you to set the operations parameters for the
scanner.
To help visualize the menu’s organization and to locate the page number
where each topic is described, see figure 2-3.
Figure 2-3 Operations Menu Structure
Triggering Mode
Default: Continuous Read
Options: Continuous Read, Continuous Read 1 Output, External Level,
External Edge, Serial Data, Serial Data & External Edge
(page 2-16)
Bar Code
Output
–
Enabled
–
Disabled
(page 2-11)
Triggering Mode
–
Continuous
Read
–
Continuous
Read 1 Output
–
External Level
–
External Edge
–
Serial Data
–
Serial Data &
Edge
(page 2-14)
End of
Read Cycle
–
Timeout
–
New Trigger
–
Timeout &
New Trigger
(page 2-14)
Timeout in 10
ms incs *
–
100
–
User
Definable
(ASCII char.)
(page 2-15)
Serial Trigger
Character
–
^]
–
User
Definable
(ASCII char.)
(page 2-15)
External
Trigger
Level
–
Positive
–
Negative
(page 2-17)
Good Decode
Reads
–
1
–
User Definable
(1 to 31)
(page 2-17)
Match Code
–
Disabled
–
Enabled
Operations
–
Bold text represents default settings.
* Divide the number entered on the command line by 100 for time in seconds.
(page 2-16)
When to
Output
–
As Soon As
Possible
–
End Of Read
Cycle
(page 2-16)
Noread
Message
7 digits
–
NOREAD
–
User Definable
(ASCII char.)
(page 2-16)
Noread
Message
–
Enabled
–
Disabled