LVS-7510 Integrated System Installation and Quick Start Guide for Zebra Printers
LVS-7510 Integrated System Installation and Quick Start Guide for Zebra Printers
Page 16 of 16
Appendix A: LVS-7510 Integrated System Preventive
Maintenance
Daily cleaning of the LVS-7510 Integrated System sensor is recommended to maintain optimum
performance; however, the sensor may require more or less frequent cleanings depending on how often the
LVS-7510 Integrated System is used and the conditions of your environment.
To maintain a clean and clear appearance, spray a soft, lint-free, non-abrasive towel or cloth with a
commercially available household glass cleaner, such as Windex
®
, Glassex
®
, VISS
®
, and Mr. Muscle
®
and
gently clean the outside of the sensor glass.
o
DO NOT directly spray the sensor glass with glass cleaner; always spray a towel or cloth with glass
cleaner and then gently wipe the sensor glass.
o
DO NOT use an industrial-strength glass cleaner.
Replace the Calibrated Conformance Standard Test Card every two years.
If you have any questions or concerns about the performance of the LVS-7510 Integrated System, please
call your local Omron Microscan distributor or Omron Microscan technical support:
+1-800-762-1149 | +1-425-203-4841 | [email protected]
