Microscan HawkEye 40T, User Manual

Page: 20 / 94

Chapter 1
Getting Started
1-10
HawkEye™ 40T User Manual Rev 2.0.0, Jan 2009
• Transfer Only Unsent Data in Memory — This code will send only the data
in memory that hasn’t already been sent when the code is scanned (ONLY
works in Send and Log mode).
• Delete Scanned Data from Memory — Scanning this code will erase all data
in the reader’s non-volatile memory.
You may also program a trigger to transfer data (see Chapter 2, “Optimization
and Trigger Programming”).
Auto Transfer Buffer Memory
By default, when reconnected, the HE40T will automatically transfer any data in
memory once a connection to a host is established. If your application is not
ready, the reader will send the data anyway and the data could be lost. If you do
not wish for the reader to immediately send data upon connection, scan the
Disable Auto Transfer Buffer Memory, as shown in Figure 1–9.
FIGURE 1–9.
Auto Transfer Buffer Memory Codes
Send & Buffer
Mode (Default) Log Only Mode
Send & Log Mode
Transfer All Data
Enable Auto Transfer
Buffer Memory (Default)
Transfer Only Unsent
Data in Memory Delete Scanned Data
from Memory
Disable Auto Transfer
Buffer Memory
in Memory