Operator Maintenance 115
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX
Operator’s Manual SOLID F40
Edition 1.1
7.6. Transfer-/Separator Charger Replacing
!
After having printed every 50,000 pages A4 landscape the transfer-
/separator charger has to be refurbished.
After having printed 200,000 pages A4 landscape the transfer-
/separator charger has to be replaced.
Turn off the printer and pull the power plug before start working at
the chargers.
1. Open the front cover of the printer.
2. Open the waste toner recovery unit.
Waste toner
recovery unit
Open lever (black)
Make sure the transfer-/separator charger is in its down position to
avoid damaging the photoreceptor drum. To determine the position of
the transfer charger (C3) please go on like this:
- Turn the transfer elevator drive shaft clockwise.
Should the charger start to move up it is already in the
down position.
-
Is the charger moving down, turn the drive shaft until it is
in the deepest position.
