50 Handling of Consumables
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX
Operator’s Manual LOGIJET T8-3
Edition 1.0prel
Hints
for the error situation „Ribbon wrinkles“:
- Use the last test print to check the „direction“ of the wrinkle.
The wrinkle can happen from the lower left to the upper right
direction (error image „ ´ “; seen in the printer’s feed direction).
On the other hand the wrinkle can happen from the lower right
to the upper left direction (error image „ ` “).
-
Error image „ ´ “
: First of all please reduce the printhead
pressure on the
right side
by adjusting the 2 adjustment knobs
of the right side both about one step
counterclockwise.
If both adjustment knobs already show level „1“ (i.e. the lightest
contact pressure is already chosen) then please increase the
printhead pressure on the
left side
by adjusting the 2 adjustment
knobs of the left side both about one step
clockwise
.
-
Error image „ ` “
: The descriptions from above shall also
apply by analogy – you only have to interchange the words
„right“ and „left“.
- Generate a test print.
- Repeat the steps described above until you reach a satisfactory
print quality.