Panel Functions 113
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX
Operator’s Manual LOGIJET T8-3
Edition 1.0prel
6.28. Print Speed Adjustment
This function is used to change the print speed (adaptation to the actual used
materials, e.g. to optimize the contrast of the printout).
The setting range for the print speed is 2 inch/s up to 6 inch/s (inch per
second).
Panel display
Notes
[Online ]
Turn the printer OFF LINE with this key.
[Menu Level 1 ]
. . .
Press the
or
key until [Engine
]
is displayed.
[Engine ]
Press this key. The Engine menu is selected.
[Printspeed ]
Press this key. The Printspeed menu is selected.
[ 6 inch/s ]
The current set value is displayed.
. . .
Press the
or
key until the
desired value is displayed.
[ 4 inch/s ]
Here the print speed is reduced to 4 inch/s.
[Save as Setup? ]
[Online ]
In addition this new value can be saved as
setup value (using the
key), before the
printer is turned ON LINE again. After this
decision turn the printer ON LINE again: Press
the
key longer than 2 seconds.