5
CAUTIONS
BEFORE USE
The electronic levels are supplied in ABS
anti-shock boxes.
Inside each box you can find a complete
set of components, needed for the proper
operation of the level (see the component
list for each model).
Herewith are a few suggestions for the
maintenance and proper use of your in-
strument:
Before measuring, clean thoroughly the
surface to be checked and the base of the
level with s
pecific detergents
(Paste for
granite, Art. TZ0510 – Liquid detergent,
Art. DT0520). Never use wax, grease or
water-based detergents for cleaning gra-
nite.
Never use the instrument close to
magne-
tic fields
, as the measurements could be
altered.
The surface plate to be checked should
be
levelled
as closely as possible to avoid
inaccuracies of the readings due to com-
pound errors.
Check the levelling of the plate or the sur-
face to be measured by using a spirit level
following the instructions supplied with
the Microplan plates (Test report).
Before starting the measurement, check
the
battery charge
, pushing the button
‘Batt’ (VA110), or just checking that the
display does not show ‘Low Bat’ (VD110
and LE051).
Check the instrument periodically, to
verify its calibration and performance. A
periodical check
of the instrument can
ensure better performance and lower
maintenance costs over time.
Lato Etichetta
Label Side
L
0.22
L
0.22
L
0.22
W
0.22
W
0.5
W
0.5
W
W
Vista Inferiore
Bottom view
