2
Introduction
The Micropack FS301 Flame Simulator is used to test the correct operation of Micropack
FDS300 and FDS301 Visual Flame Detectors.
The simulator has been designed specifically to enable long range testing of FDS300 and
FDS301 Visual Flame Detectors. The device has been designed for hand held use by a single
operator. The device is a completely self contained, portable unit. A single charge is
sufficient to test up to fifty Flame Detectors.
The simulator has been designed specifically for use in the extreme marine environments
experienced offshore.
2.1
Features
•
Long Range
– The simulator can reliably operate FDS 300 and FDS301 Visual Flame Detectors
at distance between 3m & 8m.
•
Portable
– The flame simulator is a portable hand held unit designed for single operator
operation.
•
Robust and Reliable
– The flame simulator has been designed for extreme offshore
conditions.
•
Reduced Maintenance Costs
– Reduces the need for scaffold or ladder access to the
detector.
2.2
Flame Simulator Enclosure
The flame simulator electronics are housed in an enclosure which is certified for use in
hazardous areas. For the exact certification and conditions of use see certification label on the
device, or the example drawing below:
The enclosure comprises of two enclosure covers (one with a faceplate window), the enclosure
body (with certification label) and fixing collars to connect the enclosure body and covers
together.
This document is strictly private and confidential, reproduction without Micropack approval is prohibited. © Micropack Engineering Ltd, 2015
FS301 Flame Simulator
FS301 Safety and Technical Manual
4
Ref: 2301.6042
Rev: 2.3 ECN: 4553
