If you intend to sand down the edges of the parts, you may
want to do this before you start building to make it easier.
Glue in the wing support. Note that the wing support will
completely block the wing slot in the main fuselage. This is
how it is supposed to be. Refer to the slots in the wings to see
how they attach.
Look along the body from the front to check that the wing
mount is level.
Glue on the vertical stabilisers to the horizontal stabiliser and
make sure they are perpendicular (90 degree angles). Then
place them down like this to dry.
Each wing must be inserted half way into the body part, so
mark a line about 2mm from the end of the wing. This will help
when inserting the wings to make sure you have each wing
inserted the same amount.
Wings with the guide lines drawn.
