Next attach the prop.
Additional O-rings can be purchased on the MicronWings website.
Next glue in place the central section for the wings. Once
again tape it down with model masking tape and allow to
dry.
Note that after attaching this section you will no longer be
able to easily access the servos or receiver to make
adjustments without unscrewing the bottom mounting
plate from underneath.
Glue on the wings ensuring they are level and have the
same dihedral angle. Insert some pins on a steep angle at
the locations shown here to hold the wings flush with the
centre cover as it dries.
Your airframe is now complete
Summary of Contents for Balsa Craft Cub
Page 3: ......
