Receivers
The kit doesn’t come with a receiver or servos so it is up to you to choose which one is best for
your needs. You may have a receiver from another model which you can fit. The two receivers
below are suggested for this model.
Option1 – Micro Receiver for Servos
Option 2 – Brick Style Receiver
Receiver 4Ch DSMX With 2A ESC
Receiver 24R6CLV11 DSM2 Brick
Servo 5320 Black SH
As an example in this manual we will outline the procedure for setting up Option 1 with separate servos.
Mount the receiver to one side of the mounting board.
Servos can be screwed into the frame from the top
where the wings attach.
Also mount the geardrive as shown here and feed the
wires through to attach to the receiver. You may need
to widen the gap between the spur gear and the hub
to make sure it has clearance with the balsa frame.
Use the short arms
with 2 holes
Use the outside positions with
the servo arms facing inward.
Summary of Contents for Balsa Craft Cub
Page 3: ......
