MR380-1 Series Instruction Manual
Page 17 of 35
in
Figure 15
. ‘Power’ should be illuminated and ‘Emergency ON’
or ‘Light ON’ should be On.
•
Verify undamaged fiber with visual fault finder.
•
Verify that the switch loss is < Optical Insertion Loss specification
of the Switch sensor, using optical power meter.
•
Clean fiber optic surfaces on the emergency switch using the
appropriate cleaning materials.
Figure 14. LC Loopback MR380 Controller Check
4.2.
Damaged In Shipment
In the event of a damaged instrument, write or call your nearest MICRONOR office in the U.S. A.
Please retain the shipping container in case reshipment is required for any reason.
If you receive a damaged instrument you should:
1)
Report the damage to your shipper immediately.
2)
Inform MICRONOR
3)
Save all shipping cartons.
Failure to follow this procedure may affect your claim for compensation.
