MR380-1 Series Instruction Manual
Page 10 of 35
3.
MR380 DIN Rail Controller Installation and Operation
3.1.
Mounting the E-Stop/E-Actuator Switch
For mounting the sensor switch into a panel, please provide a cut-out as dimensionally shown in
Figure 5
and Mechanical Reference Drawing. Refer to
Figure 6
for switch orientation. Secure panel-
mount switch with all appropriate designations and requirements.
Figure 5. Panel Cut Out Dimensions and Assembly Hierarchy of Emergency Switch
Figure 6. Emergency Switch Orientation Interchangeable when Mounting into Optical Block
Mushroom Push Button
Mounting Nut
Panel Lock Washer
Gasket
2-56 x 3/16
Panhead Philips
Screws
