Micronor MR380-1-3, Instruction Manual

Page: 11 / 29

MR380-1-3 Instruction Manual
Page 11 of 29
MR380-1-3 Installation
3.4.1. Electrical Connections
Figure 7. Front Panel Outputs of MR380-1-3 Controller
The table above depicts the pinouts for the MR380-1-3 controller, and the state of each
terminal when an E-stop switch is on or off. For powering the controller, +24 VDC is supplied
to terminal 1 and grounded using terminal 2. For typical E-stop operation, connect to
terminals 5 and 6 or terminals 8 and 9.
The contact on the controller module uses a Phoenix Contact screw terminal. For more
information, consult Controller specifications given in Section 6.1 . If connectors are lost or
damaged, contact Micronor Sales for replacement details.
MR380-1-3 Fiber Optic Controller State Table
Terminal Description
1 +24 VDC Power Supply
Module
Powered
Module Not
Powered
2 Ground Input
Switch
ON
Switch
OFF
Switch
ON/OFF
3 Digital 24V Normally High LOW HIGH -
4 Digital 5V Normally High LOW HIGH -
5 Normally Closed Relay Contact 2 OPEN CLOSED OPEN
6 Common Relay Contact 2 - - -
7 Normally Open Relay Contact 2 CLOSED OPEN CLOSED
8 Normally Closed Relay Contact 1 OPEN CLOSED OPEN
9 Common Relay Contact 1 - - -
10 Normally Open Relay Contact 1 CLOSED OPEN CLOSED