M7S-Hi System Board Manual
Configuring the M7S-Hi
Although the M7S-Hi system board is packaged in
protective materials, it is important to use care while
unpacking and setting up.
Static Electricity
The M7S-Hi is shipped from the factory in an antistatic
bag. To reduce the possibility of damage, it is important
to neutralize any accumulated static charges on your
body before handling the board. The best way to do this
is to ground yourself using a special wrist or ankle strap.
If you do not have a strap, you should touch both of your
hands to a safely grounded object. After you have
grounded yourself, ground the M7S-Hi via the solder
pads surrounding one of its mounting holes.
Once the M7S-Hi is removed from its packaging, place
it on top of the antistatic bag. Carefully inspect the board
for damage which may have occurred during shipment.
Environment Considerations
Make sure the finished computer system is in an area
with good ventilation. The system should not be in direct
sunlight, near heaters, or exposed to moisture, dust or
dirt.
Chapter 2: Configuring the M7S-Hi
2
Chapter
11
