Micronics M6Mi Pentium Pro, User Manual

Page: 16 / 80

M6Mi System Board Manual
Section 2: Configuring the M6Mi
14
Table 2-2: Jumper settings for the CPU Voltage Identifica-
tion (VID) selection.
Table 2-3: Jumper settings for the AT Bus clock selection.
Table 2-4: Jumper settings to clear the BIOS CMOS
settings. With your computer's power off, close pins 2-3,
wait ten seconds and place the jumper back on pins 1-2.
(The jumper must be placed back on pins 1-2 for the system
to function properly.)
NOTE: This will reset all BIOS default settings. Any changes
you have made will be lost.
CPU Voltage W1 W2 W3 W4
VID-Enabled (default) Open Open Open Open
Non-VID 2.9V Close Open Open Close
Non-VID 3.1V Close Open Close Close
Non-VID 3.3V Close Close Open Close
Table 2-2: CPU Voltage Selection
Jumper Function Settings
W11 Normal (default)
Clear CMOS 1-2
2-3
Table 2-3: AT Bus Clock Selection
Table 2-4: Clear CMOS Selection
Jumper Function Settings
W12 Default Close