M6DPi System Board Manual
Chapter 4: The BIOS Setup Utility
41
Parallel Port
The parallel port may be configured using the following
options: Disabled (No configuration), Enabled (User
configuration), Auto (BIOS configuration) and PnP
O/S (O/S configuration).
Floppy Disk Controller
The selection allows you to enable or disable the floppy
disk controller.
Integrated PCI IDE
Enables or disables the integrated Local Bus IDE adapter.
The IDE controller may be set for Primary (default) or
Disabled.
Use MP Specs
Select the Multiprocessor specification. The default set-
ting is 1.1.
Plug & Play O/S
This selection, when set to Yes, allows the system to work
with a Plug and Play operating system such as Windows
95. The default setting is No. NOTE: This selection
should be set to No when using Windows 3.1 or Windows
NT.
Reset Configuration Data
Select Yes if you want to clear the system configuration
data. The default setting is No.
