M6DPi System Board Manual
Chapter 3: Installing the M6DPi
Installing a PCI Peripheral Card
Micronics PCI slots accommodate all PCI peripherals
that meet the PCI 2.1 specifications. Follow the steps
below to install a PCI card:
1.
Turn the computer system off and remove its cover.
2.
Choose an unused PCI slot and remove the slot
cover.
3.
Insert the card with the bottom edge level to the slot.
Never insert the card at an angle.
4.
Carefully push the card straight down, making sure
the card is fully inserted.
5.
Replace the screw which holds the card into place.
6.
Replace the computer cover.
7.
Refer to the PCI card’s documentation additional
instructions regarding installation and software driv-
ers.
Figure 3-3: Installing a PCI Card
28
