This installation reference guide outlines the steps required to install and set
up your TREQr-5 device. For more detailed instructions and specifications,
refer to the complete TREQr-5 Installation Manual available at Micronet-inc.
Figure 1: TREQr-5 device installed on vehicle
windshield
Unpack & Verify Package contents
•
TREQr-5 Device
•
2-Part Liquid Adhesive (Qty:1)
•
Cable Ties (Qty: 3)
•
6/9-Pin Adapter Cable (Optional)
•
Alcohol Wipes (Qty:1)
•
2-Wire Adapter Cable (Optional)
6/9 Pin Cable (Optional)
Cable ties, Alcohol wipe, Liquid Adhesive
Create new Vehicle Profile:
c.
Navigate to
admin > Vehicles > add Vehicle.
d.
Complete the
add Vehicle form
by entering information in the required fields
(indicated by red (*) asterisk).
Important:
The vehicle VIN# is required to download the vehicle-specific
firmware file later in the installation process. Be sure that the VIN# is entered
accurately.
e.
Click
save
when finished.
Update the TREQr-5 Device > Vehicle assignment:
f.
Navigate to
admin > Devices.
g.
Locate the TREQr-5 device in the list, and click
edit.
h.
Under the Device Assignment section, click the
show vehicles for assignment
link. A vehicle list will display.
i.
Use the “Search” tool or scroll through the list until you locate the vehicle you
are installing the device in. Select the vehicle by clicking the radio button next
to the Vehicle ID.
j.
Click
save.
k.
The TREQr-5 device is now assigned to the vehicle and the unit can be installed
in the vehicle.
Prepare Installation location:
a.
Identify the desired installation location on the vehicle windshield. We
recommend installing in the upper-left or lower-left (driver side) corner of the
windshield.
b.
Clear windshield mounting location of any labels, stickers, or debris. You may
need to use a solvent such as acetone or lacquer thinner to clean the area of
any debris.
