manualshive.com logo in svg

MicroNet SP6524PWS, Owner'S Manual

Share
Download
MicroNet SP6524PWS Owner'S Manual Download Page 67

 

 Publication date: August, 2012 

 Revision A1

 

58

Parameter description: 

VID: 

VLAN identifier. Each tag-based VLAN group has a unique VID. It 
appears only in tag-based mode. 

Member:   

In modify function this is used to enable or disable if a port is a member 
of the new added VLAN, “Enable” means it is a member of the VLAN. 
Just tick the check box (

) beside the port x to enable it. 

Port: 

Port number. 

VLAN aware Enabled:  

Discard other VLAN group packets, only forward this port joined VLAN 

group packets. 

Packet Type: 

All:      

     Forward all tagged and untagged packets. 

Tagged Only: 

      Forward tagged packets only and discard untagged packets. 

Pvid: 

This PVID range will be 1-4094. Before you set a number x as PVID, 

you have to create a Tag-based VLAN with VID x. For example, if 
port x receives an untagged packet, the switch will apply the PVID 
(assume as VID y) of port x to tag this packet, the packet then will 
be forwarded as the tagged packet with VID  

 

Summary of Contents for SP6524PWS














































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands