Device Installation
Mechanical Installation
GDUTUG500/01
CE-500 MDT Hardware Guide
84 / 97
E
E
l
l
e
e
c
c
t
t
r
r
i
i
c
c
a
a
l
l
I
I
n
n
s
s
t
t
a
a
l
l
l
l
a
a
t
t
i
i
o
o
n
n
P
P
r
r
o
o
c
c
e
e
d
d
u
u
r
r
e
e
1.
Prepare the Receptacle-connectors wiring connected to the required peripherals and power signals.
2.
Connect the receptacle connectors to the Accessory cables or Cradle plug connectors.
3.
Connect other peripherals with the standard interface connector types to the Accessory cables or
Cradle connectors.
4.
Do one of the following depending on the mode:
In the Fixed-mounted mode, connect the Accessory cables to the CE-50X device terminal
connectors.
In the Fixed-portable mode, insert the CE-50X device into the device Cradle.
5.
To power on the CE-50X device, press the Push button and verify that all connected peripheral
operate properly.
6.
In the Fixed-mounted mode, fix the Accessory cables on the CE-50X device with cable mounting
screws.
M
M
e
e
c
c
h
h
a
a
n
n
i
i
c
c
a
a
l
l
I
I
n
n
s
s
t
t
a
a
l
l
l
l
a
a
t
t
i
i
o
o
n
n
O
O
v
v
e
e
r
r
v
v
i
i
e
e
w
w
The rear panels of the CE-50X device and CE-500 device Cradle provide a similar mechanical
infrastructure for mounting-stand (arm) installation. If a solution uses the Fixed-portable mode, the CE-
500 device Cradle must be fixed-mounted in the vehicle cabin using the mounting arm, when the device
is periodically attached and removed from it during operation.
In the Fixed-performing mode, the mounting arm is directly attached to the rear panel of the device
(details follow).
The mounting-arm screw-insert disposition is compatible with RAM
®
Mounts standard mounting-arm
types.
The Micronet mounting arm is also available.
NOTE:
Mounting arm screws included only with Micronet mounting arm. Screws type and
dimension for other mounting arm provided below.
