16
HERBIFLEX-4 EXTRA
Press lever down (1) for treating small
areas. Press down and forward (2) for
continuous spraying. To stop flow, pull
back lever and release.
N.B. for safety, the valve can be locked in
the off position by pushing the lever
forward (3).
PART
NO.
DESCRIPTION
QTY
3374 /40
TUBE, (NYLON) 3/16" O.D.
1
3456
SCREW, NO. 6 X 1/4 " S/T (B)
2
3691
NUT, 6MM
1
4309/19
TUBE, (PVC) 3/16" I.D. - 0.19M
1
4309/102
TUBE, (PVC) 3/16" I.D. - 1.02M
1
4940
BOTTLE SECURING CAP
1
5037
FILTER GAUZE
1
5063
DEFLECTOR, AIR BLEED
1
5087
BACKPACK CONNECTOR
1
5088
VALVE/HOSE CONNECTOR
1
5111
'O' RING (BS 215) - NITRILE 70
1
5148
'O' RING ( BS 125) - VITON
1
5456
HANDLE BRACKET
1
5457
NUT, UNION
1
5458
VALVE/HANDLE ADAPTOR
1
5463
PIN, BRASS, 1MM X 10MM
1
5467
VALVE, TRIGGER
1
PART
NO.
DESCRIPTION
QTY
5477
CABLE TIE
1
5478
'O' RING (BS 108)
1
5479
GRIP, PVC
1
5481
SCREW, M6 X 25 POSI PAN
1
5482
BOTTLE HOLDER
1
5483
HANDLE, ALUMINIUM
1
ACCESSORIES (not shown)
BOTTLE, PET, 1 LITRE
1
OPTIONAL EXTRAS
4390
BOTTLE, 2 1/2 LITRE + CAP
When using the backpack
connector the airbleed
tube must be fitted as
shown
5
If the spray head is horizontal the spray
should project forward about 0.6 m and
produce a pattern or band around 0.5 m
wide using the standard atomiser cone
housing (A 90).
If the head is angled downwards the
band width will be reduced. The an-
gle of the spray head should not ex-
ceed 45° otherwise dripping will re-
sult.
Changing the angle of the spray head
will adjust the band width produced.
To change the angle of the spray head
slacken the vertical adjustment nut (1),
alter the angle of the head (2), re-
tighten the nut and check the new
band width produced.
The head of the HERBIFLEX-4 can
also be turned sideways in order to
spray narrow lines or adjust the place-
ment of the spray pattern produced.
To do this slacken the horizontal ad-
justment nut (3), rotate the head (4)
and re-tighten to lock the position.
