Micron Electronics TransPort NX, User Manual

Page: 41 / 170

Operating System Chapter Two - System Features
41
other than the system board (such as the display, keyboard, or an adapter card)
an error message is displayed on the screen and testing is stopped.
The POST does not test all areas of the computer, but only those that allow it to
be operational enough to run any diagnostic program.
If your system does not successfully complete the POST, but displays a blank
screen, emits a series of beeps, or displays an error code, contact Technical
Support.
Operating System
When starting the TransPort NX for the first time, please note you have either
Windows 95, Windows 98 or Windows NT 4.0 already installed on your TransPort
NX.
Resetting the System
To reset the system, or “reboot,” press the [Ctrl] + [Alt] + [Delete] keys
simultaneously. This is known as a “warm boot.” This key combination acts as a
software reset switch when you encounter hardware or software problems which
might lock up the TransPort NX.
If this key combination does not shut down the TransPort NX, you can reset the
TransPort NX by using the TransPort NX’s power button. Should the TransPort
NX lock up for some reason, pressing this button for five seconds powers the
TransPort NX off.