manualshive.com logo in svg

Micron Electronics TransPort NX, User Manual

Share
Download
Micron Electronics TransPort NX User Manual Download Page 123

Locating a Problem

Chapter Eight - Troubleshooting

123

Chapter Eight - 
Troubleshooting

Required safety features have been installed in the computer to protect you from 
injury. However, you should use good judgment to identify potential safety 
hazards:

• 

Read all of these instructions before using your TransPort NX and save 
them for later use.

• 

Follow all warnings and instructions marked on the product.

• 

Unplug this product from the wall outlet before cleaning. Do not use liquid 
or aerosol cleaners. To clean, wipe with a damp cloth.

• 

Do not use this product near water.

• 

Do not place this product on an unstable cart, stand, or table. The product 
may fall, causing serious damage to the product.

• 

Slots and openings in the cabinet are for ventilation. 

• 

To ensure reliable operation of the product and to protect it from 
overheating, these openings must not     be blocked or covered. This 
product should never be placed near or over a radiator or heater.

• 

Never push objects of any kind into this product through cabinet openings, 

as they may touch dangerous voltage points or short out parts that could 
result in fire or electric shock. Never spill liquid of any kind on the product.

• 

This product should be operated from the type of power source indicated 
on the marking label. If you are not sure of the type of power available, 
consult your dealer or local power company.

• 

If you use an extension cord with this product, make sure that the total of 
the ampere ratings on the products plugged into the extension cord does 
not exceed the extension cord ampere rating. Also, make sure that the total 
of all products plugged into the wall outlet does not exceed 15 amperes.

• 

emember to clean your display at regular intervals. Spray window cleanser 

onto a soft cloth and then wipe the display. Do not spray the cleanser 
directly onto the display.

• 

Clean your keyboard when needed. This can be done with a soft cloth as 
well as with a keyboard vacuum cleaner.

Locating a Problem

Problems with your computer can be caused by something as minor as an 
unplugged power cord – or as major as a damaged hard disk. The information in 
this chapter is designed to help you find and solve minor problems. If you try all 

Summary of Contents for TransPort NX











































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands