Micromeritics Gemini VII 2390a, Operator'S Manual

Page: 130 / 426

Report Options Files Gemini VII
5-20 239-42828-01 - Dec 2012
Summary Report
The
Summary Report
provides a condensed listing of selected data results. In the
Selected Reports
list box, highlight
Summary
, then click
Edit
. Select the data types to include in the Summary report.
In the Pore Volume column, if
Adsorption total
or
Desorption total
is selected, the
P/Po
field is
enabled. Enter the relative pressure used to calculate the total pore volume.
If
Use calculation assignments
is not selected on the
Collected Data
window, the isotherm is interpo-
lated to the value in the
P/Po
fields and the point is used for the total pore volume calculation.
Otherwise, the point selected with calculation assignment is used. Pass/Fail criteria can be specified
for up to four parameters.
Field or Button Description
Select All /

Deselect All buttons
Selects (or deselects) all choices.
Used to enable the first Pass/Fail item. Until the Summary Report is
selected,
S A Single-point BET
will be displayed by default. When a
checkbox is selected, click the Pass/Fail button and select criteria options
for pass/fail options.
•
S A: Single-point BET checkbox -
select to enable the
Pass/Fail [n]
button in the
Item [n]
group box.