Calibration
3Flex Service Manual
4-2
Aug 2013
Calibration
This calibration and test procedure is the one used in Micromeritics’ Final Assembly Department. It is
provided as a reference so that you will be familiar with the calibration procedures and instrument tests
that are performed on the instrument during manufacture.
The methods used at the factory may differ from the methods documented in the Maintenance docu-
ments. Use the established service calibration and test procedure unless otherwise directed by a
Micromeritics Service Managers or Service Specialist.
•
Product Calibration Procedure,
P/N: 350-34000-76
Mechanical and Electrical Drawings
These drawings show assemblies in detail. Some parts listed in these prints may be available only as an
assembly or in a kit. Do not provide copies of these drawings to a customer.
Mechanical
Refer to the following table for a list of the mechanical prints. Double-click on the part number to view
the print.
Print Number
Description
Semi-final assembly
Chassis assembly
Card Cage
Power tray assembly
Base manifold assembly
Elevator assembly
Vacuum system assembly
Pneumatic manifold
Vacuum gauge assembly
Cabinet heater assembly
Inlet manifold assembly
