The Bluetooth input is indicated on MyAMP front panel by a Bluetooth logo framed by two
leds, a red one on the left side and a blue one on the right.
When selecting the Bluetooth input for the first time, MyAMP is in pairing mode , the red
and blue leds will flash alternatively. You should now be able to see MyAMP in the list of
Bluetooth units on your Bluetooth device. Connect your device to MyAMP following your
device connection procedure. Once connected, MyAMP front panel indicator will change
status: the red led will switch off and the blue led will flash every 2 seconds. From your
Bluetooth device you can start sending music to MyAMP. As soon as MyAMP will receive
a valid data stream the front panel blue led will stop blinking and will stay on as long as
MyAMP receives music.
You can connect up to 8 different Bluetooth units to MyAMP, actually, allowing every
member of the family to listen to its own music.
To connect a new device to MyAMP you must enter pairing mode first. To access pairing
mode, a microswitch is located on the back panel of the unit indicated by BT/PAIR. Using a
toothpick or any similar object , press at least 2 seconds on the pairing switch. On the front
panel, the red and blue leds will flash alternatively indicating that you have entered pairing
mode. You should be able now to see MyAMP in the list of Bluetooth devices on your
Bluetooth unit. Connect your device to MyAMP following your device connection procedure.
Once connected, MyAMP front panel indicator will change status, the red led will switch off
and the blue led will flash every 2 seconds.
Once 8 devices have already been paired to MyAMP, if you try to pair an additional device
the first one that was paird to MyAMP will be erased and replaced by the new one. You can
always decide to erase the list of devices that were connected to MyAMP Bluetooth module.
To do so, you need to press the pairing switch for more that 10 seconds and the Red led will
blink 5 times on the row indicating that the memory was erased.
To guarantee MyAMP musical reproduction integrity, the Bluetooth module is only powered
when selected, avoiding any interaction between analog and digital signals. You will need to
connect your Bluetooth device to MyAMP again when you select the Bluetooth input.
NOTICE 140X140 12 PAGES UK.indd 9
26/06/14 16:52