AVP
INSTRUCTIONS
E
14
MAX LEVEL INDICATION
AVP indicates on its display that you have reached
the maximum level of your system by replacing the
attenuation indication (e.g. –8db) by the word MAX.
This MAX indication depends of your set-up
configuration. If, for instance, you have raised any of
the channels by +3db the MAX indication will come as
soon as you will reach the step following –4db.
MEMORY
All of your specific adjustments as well as all of
your different set-ups are automatically stored in an
EEPROM that keeps them intact even if AVP is
disconnected from the mains.
At power-on or when you come out of standby
AVP will recover the input and the volume that were
set during your last listening session. If the volume
was below -30dB, AVP will revert the volume level
previously set and if the volume was above -30dB,
AVP will revert to -30dB in order to avoid any too loud
unexpected reproduction.
AVP TECHNICAL CARACTERISTICS
Typical Audio Performance.
Stereo Analog Inputs : ..............................................2
Maximum analog input level (rms): ........................2V
Analog A/D resolution : ......................................20 bit
Coaxial Digital Inputs : .............................................2
Optical Digital Inputs : ..............................................2
Digital Input Format : ....................................IEC1937
Digital input sampling frequency : ....32 - 44.1 - 48Khz
D/A resolution : .............................................6 x 20bit
Line-out audio Outputs : ........................................... 3
Output impedance : ........................................
<
600
Ω
Front Gain (L+R) : .............................................14 dB
Sub Gain : ..........................................................24 dB
Maximum line output level (rms): ...........................5V
Center channel power ( 4
Ω
) : ........................... 60 W
Bandwidth (40W / 8
Ω
) : ...................... 20 Hz - 30 kHz
Surround channels power ( 4
Ω
) : .................. 2x60 W
Output impedance( all amplifiers) : ......
<
0.1
Ω
/ 1kHz
THD ( 20Hz-20kHz ) ( all outputs) : ................
<
0.1 %
Power Headroom : ..........................................
>
15dB
Signal to noise ratio "A weighted" : ................
>
85 dB
Decoder type : ..........................Dolby Digital / MPEG
Options : .............................................................DTS
Power supply.
Power consumption ( Max ) : ........................... 220 W
Fuse type ( 5x20 ).................. 1.6A / 250V (Slow blow)
3.15A / 130V (Slow blow)
Dimensions
: W x D x H in mm .......... 430 x 295 x 70
Weight
: .......................................................... 6.5 kg
WARRANTY
Micromega S.A. warrant the product contained herein
to be guaranteed against manufacturing faults and
defects for a period of 2 years from the purchase
date.
For warranty work the unit must be returned to the
vendor with a copy of the original sales receipt.
The warranty will be invalid should the unit be :
- Damaged by accident.
- Damaged by negligence.
- Damaged by miss - use.
- Damaged by miss - installation.
- Damaged by tempering by a non - appointed agent.
- Damaged by transit.
You should contact your vendor in your country of
purchase with regards to specific local warranty
details.
Manufactured under licence from Dolby Laboratories.
"Dolby", "Pro-Logic" and the double-D symbol are
trademarks of Dolby Laboratories. Confidential
Unpublished Works.
©
1992-1997 Dolby Laboratories,
Inc. All rights reserved.
Manufactured under licence from Digital Theatre
Systems, Inc. US Pat No. 5,451,942 and other world-
wide patents issues and pending. "DTS", "DTS Digital
Surround" are trademarks of Digital Theatre Systems,
Inc.
©
1996 Digital Theatre Systems, Inc. All rights
reserved.