USER’S MANUAL
-7-
PRODUCT INTRODUCTION
〖
Protect Functions
〗
Protect functions can prolong the air
conditioner’s service life and provide more
comfortable airflow.
Delay-starting protection for the compressor
The compressor will restart working at least 3 minutes (5 minutes in heating mode) after
being turned off to keep the pressure balance of the cooling system.
Remarks:
There will be 1 minute for the compressor to work after the unit is electrified for
the first time.
Freeze-prevention
To prevent indoor heat exchanger freezing in cooling and dehumidification operation,
compressor or outdoor fan may stop running; indoor fan speed will be adjusted to a
higher gear automatically.
Dry for enzyme-prevention
(optional)
Indoor fan motor will go on running for 3 minutes at low fan speed when turned off in cooling
mode in order to keep dry condition inside the unit.
Reset power or Auto restart (alternative)
Reset power: When there is a power suspension, air conditioner will automatically switch
off. When the power is back, the unit will automatically reset power. For energy saving if
there is no person in the room, air conditioner will stay in PAUSE status. User needs to
turn on Air conditioner by remote controller.
Auto restart: The unit memories the operation mode, air flow setting, temperature setting
etc., so that should there be a power failure when the unit is in operation, it will
automatically return the same operating conditions when the power is restored.
Cooling overload working (optional)
In cooling operation, if the temperature of outdoor heat exchanger is too high, indoor fan
speed will be adjusted to a lower gear automatically and compressor may be stopped.
Drip proof (optional)
In cooling and dehumidification operation, louver blades can change the position
automatically to prevent from dripping.
