REMOVABLE COVER
FOR CLEANING
REMOVABLE SCREEN
(P/N RS14)
LOCK PRONG
SENSING CHAMBER
Canada
25 Interchange Way
Vaughan, Ontario L4K 5W3
Telephone: (905) 660-4655
Fax: (905) 660-4113
Web page: http://www.mircom.com Email: [email protected]
Distributed by:
CAT. 5105
Rev. 5
Architects/Engineer Specifi cations
Operating Voltage:
Mounting Base Dependent
Standby Current:
120 micro amps
Sensitivity: 1.9%
nominal
Weight:
0.5 pounds (277 grams)
Size:
2.4”/6
mm
high
4.0”103
mm
diameter
(6.2”/158 mm diameter with
fl anged bases).
1451
Ionization detector. Must be mounted to one of the B400 Series Bases listed.
RA-400Z
Remote annunciator for 2 or 4 wire applications. Use with any System Sensor 400 series plug-in
detector. Fits standard single-gang electrical box.
MOD400R
Field test module for all of the System Sensor 400 Series Smoke Detectors.
General Specifi cations
Ordering Information
All 1451B-A ionization smoke detectors contain a
unique dual source, dual unipolar chamber detection
design which will sense the presence of smoke
particles produced by fast combustion as well as slow
smouldering fi res. Additional key features include
a blinking LED standby status indicator, an easily
visible alarm indication and provision for convenient
fi eld test and metering
The back of the detector is sealed to block back
pressure air fl ow. The chamber is protected by a fi ne
mesh (0.20”/0.508mm) screen to minimize problems
with dust, dirt and insects. If cleaning is required, it
is easy to remove the cover (with a special tool) and
obtain access to the screen and chamber to perform
a thorough cleaning.
Base Model
Loop
Current
Contact
Standby
Current Draw
Number
Version
Type
Limit
Resistor
Type
Voltage
or
Alarm
B401B-A
UL & ULC
2-wire No
-
8.5 to 35 VDC 10 to 100 mA*
B406B-A
UL & ULC
2-wire No
Form C
15 to 35 VDC 12 to 100*
* Limited by control panel
Relay Contact Ratings on the B406B base: Resistive or Inductive (60% power factor) load.
Form A:
2.0 amps @ 30 VAC/DC
Form C:
0.6 amps @ 110 VAC, 2.0 amps @ 30 VDC.
1.0 amps @ 125 VAC, 2.0 amps @ 30 VAC.
Construction:
Flame
retardant
white
Noryl
7
plastic
Temperature:
32
°
to 120
°
F
(0
to
49
°
C)
Humidity Range:
10 to 93% R.H.
(non-condensing)
Maximum air
1,200 feet per minute
velocity:
(6 meters per second)
NOT TO BE USED FOR INSTALLATION PURPOSES.
U.S.A.
4575 Witmer Industrial Estates
Niagara Falls, NY 14305
Toll Free: (888) 660-4655
Fax Toll Free: (888) 660-4113
