7.<ALARM SETTING> menu operating
Entry <ALARM SETTING> menu
setting
Ref picture 29
：
In the standby situation, calling“95”,it will entry the main Manu. Move the cursor to <ALARM SETTING>,press
“IRIS+”to entry the submenu.Ref picture 28
：
Operation details:
1.Alarm Channel:
Press “IRIS+”to entry and select alarm channel number, it can select 1-4 alarm channel
number by shaking the rocker up or down.
2.Alarm Action:
Press “IRIS+”to entry current channel set, select“yes” or “no” by shaking the rocker up or
down.
3. Alarm Mode:
Press “IRIS+”to entry the current channel, which is “always open” or“always close” mode
(set according by the alarm);
4.Output Linkage:
Press “IRIS+”to entry setting for current channel connecting the alarm signal, which
include:1-4group cruise setup,1-4 group left-right scan setup,1-4 group pattern setup,
1-220pcs preset and “close”, shaking the rocker up or down could select one of them,
“close”means don’t operate anything. After setting press “IRIS+”for saving and return.
5.Linkage output:
Press “IRIS+”to entry the linkage output setting, by shacking the rocker up or down can
select “output 1”or “output 2”.Linkage output function can offer the alarm signal to DVR
or other device. Set“close” means don’t operate linkage output.
6. Reset delay:
Setting the interval is 1-255 second between two alarm signal receiving. For example, set
the time for 10 second, it means it will reset delay automatically when received a alarm
signal longer than 10 second in the same alarm channel. After reset delay than could receive
the next alarm signal.
8. <IR LED SETTING> menu operation
Enter <IR LED SETTING> menu
In the standby situation, calling“95”,it will entry the camera main Manu. Move the cursor to <IR LED>
,
press“IRIS+”to entry the submenu.
picture 29
setting
<IR LED>
:
Infrared Intelligent High Speed Dome Camera Operating Manual
21
picture 28
setting
<ALARM>
: