Infrared Intelligent High Speed Dome Camera Operating Manual
11
Apply explanation
：
1.After entering the menu, cursor flicker position is the current chosen menu item, operate the joystick up
and down can move the cursor to choose other items. Press “iris+” or “zoom+”, enter submenu, press
“iris-” or “zoom-“,back to the former menu. If no operation in 60 seconds, then it will quit the menu.
2.Menu back will with”>>”,means with submenu,”…”means call the command.
3.1
．
PRESET> setting
Move the cursor to <AUTOMATICALLY OPERATE SETTING>, press”iris+” then enter the submenu. Showed
as picture 5:
Move the cursor to “Presets Setup”, press “Iris +”to enter into the submenu. See Picture 6.
Detail Operation
:
1
．
Preset Number:
Press “Iris +” to enter and select the preset number, up or down the joystick to select
1-220 preset point number
2. Title:
Press “Iris +” to enter and edit the title, up or down the joysticks to choose numbers
，
letters, or
characters. Left or right the joystick to move the location or correct the letters. Editing is completed
by "Iris +" to save and return;
3.Set new preset:
Press the "Iris +" to enter into setting preset points state, Pan/Tilt/Zoom to select a desired
position, press the "Iris +" to determine the location, the system will prompt "edit preset
title". if no need the title, press "iris +" to exit and return;
4.Show Next preset:
When you press "Iris +", the camera will immediately run to the next preset position,
then you can modify the preset point. If the next preset point is not set, it will prompt
"the preset is not set";
5.Delete Current Preset Point:
press "Iris +" to delete the current preset point
<
Picture 5 auto run:
Picture 6 preset
point setting: