Microlife BP3GY1-2N, Instruction Manual

Page: 21 / 71

20
4.5. Memory: Reviewing readings
At the end of a measurement, this monitor automati-
cally stores each result with date and time. This unit
stores 120 memories for each of 2 users.
Viewing the stored values
• With the unit unlocked, press "M." The display first shows "A," then
shows an average of all measurements stored in the unit for that
user.
• Press the plus or minus icon to scroll between stored readings.
Please note : Measurements for each user are averaged and stored
separately. Be certain that you are viewing the measurements for the
correct user.
• To exit, press STOP.
Memory full
When the memory has stored 120 results, a new,
measured value is stored by overwriting the oldest
value.
Clear all values
• If you are sure that you want to permanently
remove all stored values, hold down "M" until "CL"
appears and then release "M".
• To continue and erase the values, press "M"again
while "CL" is flashing.
• To discontinue with the clearing of memories,
press “STOP.”
• Individual values cannot be cleared.
4.6. Stopping a measurement
If it is necessary to interrupt a blood pressure
measurement for any reason (e.g., the patient feels
unwell), the “STOP” button can be pressed at any time.
The device then immediately lowers the cuff pressure
automatically and enters sleep mode.