19
If an error occurs during measurement, the
measurement is interrupted and an error message
«Err» is displayed.
•
Please contact your local
Microlife service center if the
error persists.
•
If you think the results are
unusual, please read through
the information in this
instruction manual carefully.
Error
Description
Potential cause and
remedy
«
Err 1
»
Signal too
weak
The pulse signals on
the cuff are too weak.
Re-position the cuff and
repeat the measurement.
«
Err 2
»
Error signal
During the measurement,
error signals were
detected by the cuff,
caused for instance by
movement or muscle
tension. Repeat the
measurement, keeping
your arm still.
Error messages
