![Microlectra SABRE Series Quick Start Manual Download Page 7](http://html1.mh-extra.com/html/microlectra/sabre-series/sabre-series_quick-start-manual_1786791007.webp)
S
SA
AB
BR
RE
E R
Reem
moottee ccoonnttrrooll
DS-SABRE-L-3 PAGE 7
Technical Specifications
Transmitters:
SABRE-Tn Transmitters
Enclosure Rating: IP68
Battery Type:
AAA x 4 (supplied)
Battery Life:
3 years @ approx 100 x 1/2second presses per 3 day.
Dimensions:
154 x 85 x 48 mm
Storage Temperature: -10 to +70
o
Celsius.
Operating Temperature: -10 to +50
o
Celsius
Changing the battery:
1.
Un screw the 6 fixing screws on the rear of the enclosure.
2.
Carefully separate the two enclosure halves - as the wires connecting them and should not be strained.
3.
Remove the front half of the enclosure (joint is on top of the red rubberised section.
4.
The batteries are fixed into the base - replace with new.
5.
Re-assemble.
Receiver Decoder:
ELITE-RXL
Enclosure Rating:
IP68
Dimensions:
267 x 148 x 78 mm (not including antenna)
Storage Temperature: -10 to +70
o
Celsius.
Operating Temperature: -10 to +50
o
Celsius.
*The relay contacts in this unit are for functional use only and must not be used for isolation purposes
Approvals Information:
All RF Solutions products are manufactured in accordance with our ISO:9001 Quality System
SABRE Systems are manufactured to CE standards
Further information available on request.
Electrical Characteristics
Min
Typical
Max
Units
Supply Voltage
6
6
V
Frequency:
869.500
MHz
RF Output Power (ERP) @ 869.5MHz
-
100
mW
ELECTRICAL CHARACTERISTICS
MIN
TYPICAL
MAX
DIMENSION
Supply Voltage for MAINS
230Vac
+10%
Vac
Supply voltage for LOW VOLTAGE
12V
24
32V
Vac/Vdc
Relay Rating* (230Vac) RLY1-4
6
12A
(peak)
A(rms)
Supply Current :
Quiescent
All relays operating*
60
170
30
120
25
90
mA
Time delay from Tx on Switch to Rx Relay operation
30
mS
Time delay from Tx sw relax to Rx Relay release
30
mS
Microlectra bv.