microjig BLADECLEAN BC-81012, Instruction Manual

Page: 14 / 24

14
Place the saw blade on top of the cleaning pad in the blade
cleaning well. Ensure the saw blade is fully submerged and soak
for 10-30 seconds.
After soaking, apply slight downwards pressure and rotate the
blade a quarter turn backwards (opposite to the cutting direction).
Pull the saw blade out by the handle and inspect the cleaned side.
Ensure that all sides of the carbide teeth are clean. Repeat the
previous step if there is any residue remaining on the teeth.
CLEANING SAW BLADES
2.1.1
Soak the Saw Blade
2.1.2 One Twist Cleaning
2.1 CLEANING SAW BLADES (CONT.)