Page 2
CONTENTS
SPECIFICATIONS ............................................................................ 2
UNPACKING .................................................................................... 3
CONNECTIONS ............................................................................... 3
Power ........................................................................................... 3
Video Connections........................................................................ 3
IN CASE OF DIFFICULTY ................................................................ 3
WARRANTY ..................................................................................... 4
RETURNS ........................................................................................ 4
Rev 2 02-16-2001, Reviewed 07-06-2015
SPECIFICATIONS
Input level
(RGB) 1.0 Vpp Composite, 75
Ω
terminated
(S) 5.0 Vpp max 75
Ω
terminated
Output level
(Y & Video) 1 Vpp typical into 75 ohm
(C) 0.28 Vpp burst typical into 75 ohm
Connectors
(R, G, B, S, Video) BNC female
(S-Video) 4 pin mini DIN F
Resolution
Greater than 400 lines
Modulation
R-Y, B-Y Axes
Genlock
Combination Analog & Digital Synthesis
Sync
Internal (sync on green) or External (default)
Video System
NTSC, RS170
H & V Frequency
15.734 Khz (H), 59.95 Hz (V)
Chroma Frequency
3.579545 Mhz
Temperature
Operating: 0
E-
40
E
C (32
E-
104
E
F)
Storage: -40
E-
60
E
C (-40
E-
140
E
F)
Humidity
Operating 10%
-
90%, Storage 5%
-
95% (non-condensing)
Power
11-20 VDC (+12 VDC typical)
120V power adapter included
Size
5.6" (w) x 4.1" (D) x 1.6" (H)
142 mm (w) x 104 mm (D) x 40 mm (H)
Weight
12 oz.
(340 g)
Manufactured in USA by MicroImage Video Systems
Page 3
UNPACKING
The ENC400B package includes the following items:
ENC400B Video Encoder
12V wall plug transformer -
DPD120050 or optional universal power
supply DTS120150
This operation manual
Please inspect all items carefully and report damaged or missing
items to your dealer or MicroImage Video Systems.
CONNECTIONS
Power
The ENC400B uses a 12 VDC wall plug transformer which is included
with the unit. Connect to a source of 120VAC, 60Hz. The ENC400B
has a soft touch power switch and will remember the switch setting
when power is removed.
Video Connections
Connect the video source (i.e. camera) to the RGBS IN connectors on
the ENC400B unit. Connect the OUTPUT signals (Video or S-Video)
from the ENC400B unit to the video displays as required.
The ENC400B is set from the factory to work with external sync. An
internal jumper can be changed to select internal (sync on green).
The RGB signal source
must
meet NTSC RS-170(A) specifications (H
& V frequency) for this product to work properly.
IN CASE OF DIFFICULTY
If you are experiencing problems with any MicroImage product, you
can contact MicroImage Support using the following methods:
Phone
610-754-6800
Fax
610-754-9766
Web
www.mivs.com
