12 / 16
- ITALY - Tel. +39.035.773 925 - Fax +39.035.773 933 - e-mail: [email protected] - Web: www.microidea.it
SETTING PASSWORD:
The password is used to block access to settings, in new devices is disabled to allow free access.
- In the Settings Menu select
“SET
PASSWORD”
and press
to access.
- Use
to set the numeric value of the password.
- Press
, when prompted to save, press
to confirm or
to cancel.
With the password activated you can only access the Quick Menu, to access all the settings you need to
enter the numeric code, access to all menu items will remain active for 5m.
To deactivate the password enter the value 00000 and save.
SETTING STEPS:
You can set the steps manually or perform automatic acquisition.
- In the Settings Menu select
“SET STEPS”
and press
to access.
- Manual adjustment
By accessing this item it is possible to set for each single step the plate value (in kVAr) of the capacity
connected to it.
- Automatic acquisition
This function allows the automatic recognition of the capacities connected to the steps.
Once the automatic acquisition is confirmed, the instrument inserts one step at a time, detects its value
and sets it automatically.
Once the acquisition is complete, check that the measured values are correct.
