19
Product Specifications
All specifications, stated operational flow rates and output water temperatures are valid within the range of
water conductivity:
• 80μS/cm to 800μS/cm + 15% at 20°C (μS–microSiemens)
• 1.25k
1
-cm to 12.5k
1
-cm +15% at 20°C
NOTE: Water conductivity may be less than 80μS/cm. Reduce flow rate to achieve comfortable water temperature.
Water conductivity greater than 800μS/cm + 15% will generate an error condition. In this circumstance, the
appliance will shut down safely and without damage.
Reference
Maximum Output Water
Temperature
Standards
Water Contamination
WaterMark AS/NZS 4020 & AS/NZS 3498
Electrical Safety
AS/NZS 60335.2.35 & IEC 60335.2.35
IP Rating
IP44
EMC
CE/C-Tick
Single Phase – CFEWH SERIES 1-10
* In accordance with AS 3500 Section 1.9.2 and Section 1.9.3. No tempering or thermostatic mixing
valves are required for personal hygiene sanitary fixtures other than stipulated in Section 1.9.2 (a).
CFEWH SERIES 1-10 | INSTALLATION Manual ©2014
| MicroHeat Technologies Pty ltd
Settable Hot Water Temperature
CFEWH Premium Model only
Standard Factory Setting 50°C
OR
Other Specified Max. Setting <50°C*
Model
CFEWH SERIES 1-10
System Type
Continuous Flow Electric Water Heater (CFEWH)
Heating Method
Optimised Direct Energy Transfer
Capacity
400 ml
Dimensions
(Without Extension Cover)
Height 295mm x Width 210.50mm x Depth 125mm
Electrical Rating
Rated Power
9.6 kW
Voltage
240 VAC
Rated Amperage
40 AMPS
Frequency
50 Hz
Electrical Connection
Live / Neutral / Ground
Operating Parameters
Switch on Flow Rate
1.5 ltr/min
20°C to Factory Set 50°C
OR
Other Specified Max. Setting <50°C
Minimum Operating Pressure Atmospheric
Output
Hot
Water Temperature
Factory Set 50°C
OR
Other Specified Max. Setting <50°C
Maximum Rated Operating Press. 10
MPa / 10 bar /
145
PSI
