CFEWH SERIES 1-10 /20 | INSTALLATION Manual © February 2021 MicroHeat Technologies Pty LTD
Page
6
of
23
Pre-Installation
–
Component Guide
Component Guide
This is an at-a-view guide to the 11 steps required to install the unit.
It will allow you to become familiar with the component parts of the unit and will assist you during the
installation process. Full details for wall mounting, electrical and plumbing installation are provided in the
following sections.
PART
NUMBER
ITEM
PART
NUMBER
ITEM
1
CFEWH Chassis
12
CFEWH Wall Mounting Screws 8mm head
maximum(Not included in the packaging).
2
CFEWH Top Cover
13
CFEWH Inlet Filter
3
CFEWH Heat Sink
14
PCB Terminal Block
4
CFEWH Flow Rate Sensor
15
Electric Mains Supply Cable Gland
5
CFEWH Temperature Sensor, Receptacle, Cable and
Plug Assembly
16
RED/GREEN LED
–
CFEWH
(GREEN Ready/RED Error)
6
CFEWH
½” BSP
Inlet Water Connection
17
Flow Rate/Temperature Setting Display
7
CFEWH
½” BSP
Outlet Water Connection
18
Extension Cover (Optional)
8
CFEWH PCBA V6.2
19
Display PCB, Cable and Plug*
9
CFEWH Earth Locking Mechanism
20
Display PCB (CFEWH SERIES 1-10 Premium ONLY)*
10
SERIES 1-10
–
CFEWH Exterior Cover (Premium)
21
Reset Button*
11
Pan Phillips Head Self Tapping Screw x 2
–
Exterior
Cover Screws Included in the packaging
–
provided
separately in the small satchel
*Shown on page 12
