CFEWH SERIES 1-10 /20 | INSTALLATION Manual © February 2021 MicroHeat Technologies Pty LTD
Page
10
of
23
CFEWH Mounting & Installation
Mounting to the Wall
The unit should be mounted onto a solid internal wall, or in an internal cupboard or space, preferably in
the vertical position using the 4 x Mounting Screws (12) placed within the Mounting Screw Hole Locations
as shown. Refer back page for screw hole template and page 19 for CFEWH dimensions.
The maximum screw head diameter is
8mm
. A screw head larger than 8mm will damage the mounting
boss and crack the body.
THIS WILL VOID THE WARRANTY
.
The mounting method used to fix the unit to a vertical wall must be capable of continuously
supporting a minimum weight of 10kg.
When mounting the unit onto a rough surface (ie: a brick wall or similar), a backing board should be
mounted
to the wall first. The unit can then
be mounted onto the backing board. This will allow the Exterior
Cover (10) to be properly fitted to the unit.
Mounting Screw
Hole Locations
12
IMPORTANT
When mounting the unit to a
wall, it is important to note
that
no
holes are drilled within
the area shown below in
RED
.
The Cable gland Fitting
hole (15) must
not
be
drilled out.
Holes drilled within this
area or the sides of the
unit, or opening out the
Cable gland Fitting hole,
will render the unit
inoperable and irreparable.
This will void the warranty.
