MicrohDJ Monsoon FX GB, User Manual

Page: 14 / 16

Maintenance And Cleaning
The following points have to be considered during the inspection:
1.
All screws for installing the device or parts of the device must be tightly
connected, and must not be corroded.
2.
There must not be any deformations on the housing, colour lenses, fi xations or
installation spots (ceiling, suspension, trussing).
3.
Mechanically moved parts must not show any traces of wearing and must not
rotate with unbalances.
4.
The electric power supply cables must not show any damage, material fatigue
or sediments.
Further instructions depending on the installation spot and usage must be handled
by a skilled installer or technician. Any safety issues must be resolved.
CAUTION!
Disconnect power before servicing.
In order to keep the fi xture in good condition and extend the life, we suggest regular
cleaning to the fi xture.
1.
Clean the inside and outside lens each week to avoid the light output from
darkening due to accumulation of dust, dirt, etc.
2.
Clean the fan each week.
3.
A detailed electrical check by approved technician every three months is
advised. Ensure the circuit contacts are in good condition.
We recommend a frequent cleaning of the device. Please use a moist, lint-free
cloth. Never use alcohol or solvents.
There are no serviceable parts inside the device. Please refer to the instructions
under “Installation instructions”.
Should you need any spare parts, please order genuine MICROH parts from your
local dealer.