background image

N2420B Operating Manual: Chapter2 General

 

1

 

2. General 

 

2.0

 

Product Overview 

The N2420B is a high-performance embedded wireless data transceiver.  
Operating in the 2400 - 2483.5 MHz ISM band, this a spread-spectrum 
module is capable of providing reliable wireless data transfer between 
almost any type of equipment.  The small-size and superior RF performance 
of this module make it ideal for many applications.  
 
While a pair of N2420B modules can link two terminal devices (“point-to-
point” operation); multiple modules can be used together to create a 
network of various topologies, including “point-to-multipoint” and 
“repeater” operation. Multiple independent networks can operate 
concurrently, so it is possible for unrelated communications to take place in 
the same or a nearby area without sacrificing privacy or reliability. 
 

1.1  Features

 

Key features of the N2420B include: 

„

  transmission within a public, license-exempt band of the radio 

spectrum

1

 – this means that it can be used without access fees 

(such as those incurred by cellular airtime). 

„

 

a serial I/O data port  with handshaking and hardware flow 
control, allowing the N2420B to interface directly to any 
equipment with an asynchronous serial interface. 

„

 

ease of installation and use – the N2420B module uses a 
subset of standard AT style commands, very similar to those 
used by traditional telephone line modems. 

„

  all units in a system are physically identical, and can be 

configured as a master, repeater or slave using the AT 
command set. No hardware modifications are required 

„

  128 sets of user-selectable pseudo-random hopping patterns, 

intelligently designed to offer the possibility of separately 
operating multiple networks while providing security, 
reliability and high tolerance to interference. 

„

  encryption key with 65536 user-selectable values to maximize 

security and privacy of communications. 

„

 

32-bit of CRC error detection and auto re-transmit to provide 
accuracy and reliability of data. 

                                                           

1

 902-928 MHz, which is license-free within North America; may need to be factory-

configured differently for some countries.

 

Summary of Contents for n2420B

















Reviews: