Microh Ultra Spot 700, User Manual

Page: 5 / 20

?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
This device is a moving-head for creating decorative effects and was designed for indoor use only.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do
not switch it on immediately. The arising condensation water might damage your device. Leave
the device switched off until it has reached room temperature.
Never run the device without lamp!
Do not shake the device. Avoid brute force when installing or operating the device.
Never lift the fixture by holding it at the projector-head, as the mechanics may be damaged.
Always hold the fixture at the transport handles.
When choosing the installation-spot, please make sure that the device is not exposed to heat,
moisture or dust. There should not be any cables lying around. You endanger your own and the
safety of others!
The minimum distance between light output and the illuminated surface must be more than 1.5
meters
Make sure that the area below the installation place is blocked when rigging, derigging or
servicing the fix-ture.
Always fix the fixture with an appropriate safety rope. Fix the safety rope at the correct holes only.
.
Operate the fixture after having checked that the housing is firmly closed and all screws are tightly
fastend
The lamp must never be ignited if the objective-lens or any housing-cover is open, as discharge
lamps may explose and emit a high ultraviolet radiation, which may cause burns.
The maximum ambient temperature 40°C must never be exceeded.
Operate the device only after having familiarized with its functions. Do not permit operation by
persons not qualified for operating the device. Most damages are the result of unprofessional
operation!
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety
reasons!
If this device will be operated in any way different to the one described in this manual, the product
may suffer damages and the guarantee becomes void. Furthermore, any other operation may lead
to dangers like short-circuit, burns, electric shock, burns due to ultraviolet radiation, lamp
explosion, crash etc.
.
3. Operating determinations
Ø
Ø
Lamp
Battery
The fitting mounts a high-pressure lamp that needs an external igniter. This
igniter is fitted onto the apparatus.
- Immediately replace the lamp if damaged or deformed by heat.
This product contains a rechargeable lead-acid battery. To preserve the
environment, please dispose the battery at the end of its life according to the
regulation in force.
- Carefully read the "operating instructions" provided by the lamp manufacturer.
Maintenance
Ø
Before starting any maintenance work or cleaning the projector, cut off power
from the mains supply.
After switching off, do not remove any parts of the fitting for at least 10 minutes.
After this time the likelihood of the lamp exploding is virtually nill. If it is necess
ary to replace the lamp, wait for another 15 minutes to avoid getting burnt.
The fitting is designed to hold in any splinters produced by a lamp exploding.
The lenses must be mounted and, if visibly damaged, they hav e to be replaced
with genuine spares.
3