The fixture is equipped with both 3-pin and 5-pin XLR sockets for DMX input and output. The
sockets are wired in parallel.
DMX-OUTPUT
DMX-input
1
- Ground
2
- Signal (-)
3
- Signal (+)
4 -
Free
5 -
Free
Occupation of the XLR-connection:
XLR mounting-socket:
XLR mounting-plug:
Caution:
At the last fixture, the DMX-cable has to be terminated with a terminator. Solder a
120
resistor between Signal (-) and Signal (+) into a 3-pin XLR-plug and plug it in the
DMX-output of the last fixture.
The transform of the controller line of 3 pins and 5 pins (plug and socket)
DMX-512 connection/connection between fixtures
120
Possible omega holder 4 positions:
5
.8.
